一、 组网需求：
Device A、Device B、Device C、Device D和Device E构成RRPP域1，该域的控制VLAN为VLAN 4092，保护所有VLAN；
Device A、Device B、Device C和Device D构成主环1；Device B、Device C和Device E构成子环2；
Device A为主环的主节点，GigabitEthernet1/0/1为主端口，GigabitEthernet1/0/2为副端口；
Device E为子环的主节点，GigabitEthernet1/0/1为主端口，GigabitEthernet1/0/2为副端口；
Device B为主环的传输节点和子环的边缘节点，GigabitEthernet1/0/3为边缘端口；
Device C为主环的传输节点和子环的辅助边缘节点，GigabitEthernet1/0/3为边缘端口；
Device D为主环的传输节点，GigabitEthernet1/0/1为主端口，GigabitEthernet1/0/2为副端口；
主环和子环的定时器都取缺省值。
二、 组网图：
三、 配置步骤：
1. Device A上的配置
# 配置RRPP端口GigabitEthernet1/0/1和GigabitEthernet1/0/2。
<DeviceA> system-view
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] undo stp enable
[DeviceA-GigabitEthernet1/0/1] port link-type trunk
[DeviceA-GigabitEthernet1/0/1] port trunk permitvlan all
[DeviceA-GigabitEthernet1/0/1] qos trust dot1p
[DeviceA-GigabitEthernet1/0/1] quit
[DeviceA] interface gigabitethernet 1/0/2
[DeviceA-GigabitEthernet1/0/2] undo stp enable
[DeviceA-GigabitEthernet1/0/2] port link-type trunk
[DeviceA-GigabitEthernet1/0/2] port trunk permitvlan all
[DeviceA-GigabitEthernet1/0/2] qos trust dot1p
[DeviceA-GigabitEthernet1/0/2] quit
# 创建RRPP域1，将VLAN 4092配置为该域的控制VLAN，并将MSTP实例0到16所映射的VLAN配置为该域的保护VLAN。
[DeviceA] rrpp domain 1
[DeviceA-rrpp-domain1] control-vlan 4092
[DeviceA-rrpp-domain1] protected-vlan reference-instance 0 to 16
# 配置本设备为主环1的主节点，主端口为GigabitEthernet1/0/1，副端口为GigabitEthernet1/0/2，并使能该环。
[DeviceA-rrpp-domain1] ring 1 node-mode master primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0
[DeviceA-rrpp-domain1] ring 1 enable
[DeviceA-rrpp-domain1] quit
# 使能RRPP协议。
[DeviceA] rrpp enable
2. Device B上的配置
# 配置RRPP端口GigabitEthernet1/0/1、GigabitEthernet1/0/2和GigabitEthernet1/0/3。
<DeviceB> system-view
[DeviceB] interface gigabitethernet 1/0/1
[DeviceB-GigabitEthernet1/0/1] undo stp enable
[DeviceB-GigabitEthernet1/0/1] port link-type trunk
[DeviceB-GigabitEthernet1/0/1] port trunk permitvlan all
[DeviceB-GigabitEthernet1/0/1] qos trust dot1p
[DeviceB-GigabitEthernet1/0/1] quit
[DeviceB] interface gigabitethernet 1/0/2
[DeviceB-GigabitEthernet1/0/2] undo stp enable
[DeviceB-GigabitEthernet1/0/2] port link-type trunk
[DeviceB-GigabitEthernet1/0/2] port trunk permitvlan all
[DeviceB-GigabitEthernet1/0/2] qos trust dot1p
[DeviceB-GigabitEthernet1/0/2] quit
[DeviceB] interface gigabitethernet 1/0/3
[DeviceB-GigabitEthernet1/0/3] undo stp enable
[DeviceB-GigabitEthernet1/0/3] port link-type trunk
[DeviceB-GigabitEthernet1/0/3] port trunk permitvlan all
[DeviceB-GigabitEthernet1/0/3] qos trust dot1p
[DeviceB-GigabitEthernet1/0/3] quit
# 创建RRPP域1，将VLAN 4092配置为该域的控制VLAN，并将MSTP实例0到16所映射的VLAN配置为该域的保护VLAN。
[DeviceB] rrpp domain 1
[DeviceB-rrpp-domain1] control-vlan 4092
[DeviceB-rrpp-domain1] protected-vlan reference-instance 0 to 16
# 配置本设备为主环1的传输节点，主端口为GigabitEthernet1/0/1，副端口为GigabitEthernet1/0/2，并使能该环。
[DeviceB-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0
[DeviceB-rrpp-domain1] ring 1 enable
# 配置本设备为子环2的边缘节点，边缘端口为GigabitEthernet1/0/3，并使能该环。
[DeviceB-rrpp-domain1] ring 2 node-mode edge edge-port gigabitethernet 1/0/3
[DeviceB-rrpp-domain1] ring 2 enable
[DeviceB-rrpp-domain1] quit
# 使能RRPP协议。
[DeviceB] rrpp enable
3. Device C上的配置
# 配置RRPP端口GigabitEthernet1/0/1、GigabitEthernet1/0/2和GigabitEthernet1/0/3。
<DeviceC> system-view
[DeviceC] interface gigabitethernet 1/0/1
[DeviceC-GigabitEthernet1/0/1] undo stp enable
[DeviceC-GigabitEthernet1/0/1] port link-type trunk
[DeviceC-GigabitEthernet1/0/1] port trunk permitvlan all
[DeviceC-GigabitEthernet1/0/1] qos trust dot1p
[DeviceC-GigabitEthernet1/0/1] quit
[DeviceC] interface gigabitethernet 1/0/2
[DeviceC-GigabitEthernet1/0/2] undo stp enable
[DeviceC-GigabitEthernet1/0/2] port link-type trunk
[DeviceC-GigabitEthernet1/0/2] port trunk permitvlan all
[DeviceC-GigabitEthernet1/0/2] qos trust dot1p
[DeviceC-GigabitEthernet1/0/2] quit
[DeviceC] interface gigabitethernet 1/0/3
[DeviceC-GigabitEthernet1/0/3] undo stp enable
[DeviceC-GigabitEthernet1/0/3] port link-type trunk
[DeviceC-GigabitEthernet1/0/3] port trunk permitvlan all
[DeviceC-GigabitEthernet1/0/3] qos trust dot1p
[DeviceC-GigabitEthernet1/0/3] quit
# 创建RRPP域1，将VLAN 4092配置为该域的控制VLAN，并将MSTP实例0到16所映射的VLAN配置为该域的保护VLAN。
[DeviceC] rrpp domain 1
[DeviceC-rrpp-domain1] control-vlan 4092
[DeviceC-rrpp-domain1] protected-vlan reference-instance 0 to 16
# 配置本设备为主环1的传输节点，主端口为GigabitEthernet1/0/1，副端口为GigabitEthernet1/0/2，并使能该环。
[DeviceC-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0
[DeviceC-rrpp-domain1] ring 1 enable
# 配置本设备为子环2的辅助边缘节点，边缘端口为GigabitEthernet1/0/3，并使能该环。
[DeviceC-rrpp-domain1] ring 2 node-mode assistant-edge edge-port gigabitethernet 1/0/3
[DeviceC-rrpp-domain1] ring 2 enable
[DeviceC-rrpp-domain1] quit
# 使能RRPP协议。
[DeviceC] rrpp enable
4. Device D上的配置
# 配置RRPP端口GigabitEthernet1/0/1和GigabitEthernet1/0/2。
<DeviceD> system-view
[DeviceD] interface gigabitethernet 1/0/1
[DeviceD-GigabitEthernet1/0/1] undo stp enable
[DeviceD-GigabitEthernet1/0/1] port link-type trunk
[DeviceD-GigabitEthernet1/0/1] port trunk permitvlan all
[DeviceD-GigabitEthernet1/0/1] qos trust dot1p
[DeviceD-GigabitEthernet1/0/1] quit
[DeviceD] interface gigabitethernet 1/0/2
[DeviceD-GigabitEthernet1/0/2] undo stp enable
[DeviceD-GigabitEthernet1/0/2] port link-type trunk
[DeviceD-GigabitEthernet1/0/2] port trunk permitvlan all
[DeviceD-GigabitEthernet1/0/2] qos trust dot1p
[DeviceD-GigabitEthernet1/0/2] quit
# 创建RRPP域1，将VLAN 4092配置为该域的控制VLAN，并将MSTP实例0到16所映射的VLAN配置为该域的保护VLAN。
[DeviceD] rrpp domain 1
[DeviceD-rrpp-domain1] control-vlan 4092
[DeviceD-rrpp-domain1] protected-vlan reference-instance 0 to 16
# 配置本设备为主环1的传输节点，主端口为GigabitEthernet1/0/1，副端口为GigabitEthernet1/0/2，并使能该环。
[DeviceD-rrpp-domain1] ring 1 node-mode transit primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 0
[DeviceD-rrpp-domain1] ring 1 enable
[DeviceD-rrpp-domain1] quit
# 使能RRPP协议。
[DeviceD] rrpp enable
5. Device E上的配置
# 配置RRPP端口GigabitEthernet1/0/1和GigabitEthernet1/0/2。
<DeviceE> system-view
[DeviceE] interface gigabitethernet 1/0/1
[DeviceE-GigabitEthernet1/0/1] undo stp enable
[DeviceE-GigabitEthernet1/0/1] port link-type trunk
[DeviceE-GigabitEthernet1/0/1] port trunk permitvlan all
[DeviceE-GigabitEthernet1/0/1] qos trust dot1p
[DeviceE-GigabitEthernet1/0/1] quit
[DeviceE] interface gigabitethernet 1/0/2
[DeviceE-GigabitEthernet1/0/2] undo stp enable
[DeviceE-GigabitEthernet1/0/2] port link-type trunk
[DeviceE-GigabitEthernet1/0/2] port trunk permitvlan all
[DeviceE-GigabitEthernet1/0/2] qos trust dot1p
[DeviceE-GigabitEthernet1/0/2] quit
# 创建RRPP域1，将VLAN 4092配置为该域的控制VLAN，并将MSTP实例0到16所映射的VLAN配置为该域的保护VLAN。
[DeviceE] rrpp domain 1
[DeviceE-rrpp-domain1] control-vlan 4092
[DeviceE-rrpp-domain1] protected-vlan reference-instance 0 to 16
# 配置本设备为子环2的主节点，主端口为GigabitEthernet1/0/1，副端口为GigabitEthernet1/0/2，并使能该环。
[DeviceE-rrpp-domain1] ring 2 node-mode master primary-port gigabitethernet 1/0/1 secondary-port gigabitethernet 1/0/2 level 1
[DeviceE-rrpp-domain1] ring 2 enable
[DeviceE-rrpp-domain1] quit
# 使能RRPP协议。
[DeviceE] rrpp enable
6. 检验配置效果
配置完成后，用户可以使用 设为首页 | 加入收藏 | 邮箱登陆 南京君诺鑫成网络科技有限公司版权所有 Copyright © 2008-2014 ICP备案号:苏ICP备10109038号 地址：
江苏省南京市珠江路435号华海大厦709室
邮编： 210018
电话： (86)25-83156292(10线)
传真： (86)25-83156290
邮箱： master@junovation.com